All Posts

Did some thinking and I think I got it close to a nice 3 voice system. All audio in a Doepfer 6u 84hp case and modulating/sequencing in an Intellijel 104hp palette. Sequencing done externally from Squarp Pyramid.

I have a Tetrapad in one of my cases and it is super fun! I am still learning to use it. I think your travel case setup looks pretty solid.
I am using my Doepfer 6u suitcase for travel setup now that I have two larger cases hehe. Still, I'd love to get an Intellijel 7u or Make Noise 7u travel case since it has lots of goodies like 1u tiles in the Intellijel case and the cv busboard in the Make Noise 7u case. Maybe I get a smaller MDLR 9u or 12u case with 1u tiles in future as I've been happy with my MDLR 14u case.

That looks like a lot of fun @ColdTurkey28, you'll have to record something and get it on our ModularGrid Best of 2020 comp! Check it out https://www.modulargrid.net/e/forum/posts/index/9382

Hey @troux

I am loving the jams I’ve been having with my small system! I’ll record one soon and share.

Here’s what I ended up with. Pretty happy so far.

EDITED Dec 23rd 2020, 06:53

Lugia,

https://cdn.modulargrid.net/img/racks/modulargrid_694152.jpg

I added the Ladiks, moved things around to cancel out the cable PITA a bit, and added an EG and LFO. I will still tweak placement a bit more. For the send/return to the stomp boxes, I would go Eurorack signal->A-520 in->A-520 out->P-520 in->P-520 out->Stomp Box in->Stomp Box out->back into Rackbrute?

Thank you this is helping out a lot!

Thank you the-erc///not hijacking at all!

Sweet!

Careful...the 531 mixer doesn't have CV over levels, but over panning.

This build can't properly support huge modules, either. You need to sort out how to get the modules down in size so that you can make something usable here. One example would be the use of the SND/RTNs...you can get the same basic functionality out of a Ladik A-520 and P-520, with the sole difference being that you'd have to control your I/O levels on the stompboxes themselves. But as for the space difference...that would half that, and the COST...$78 sounds WAAAAAAY better than $500!

One other thing: you'll probably find that you'll hate having your control surfaces on the top row. In that position, you'll have patchcables all over them and they'll be a PITA to work. Bring them to the bottom row, then all you have in the way will be the 2s to/from patches.
-- Lugia

So the quad VCA is justified with no mixer cv?
I will have to play with the placement. I had the Planar and other modules in the bottom row and I busted the power limit. I will take another look at how I am balancing/placing modules.

Thank you!

One note here, the Swarm has its own case and power I think, so you could host it separately and save a bunch of space in your rack.
-- troux
Thank you...I was actually gifted the Eurorack version of the swarm (and the Indian resonator). So I would have to get a separate case.

Yep!
Would submit this one :

EDITED Dec 23rd 2020, 03:50

Sorry for hijacking, but thought you might enjoy Surgeon on the Quadrantid Swarm
https://anthony-child.bandcamp.com/track/count-to-5-in-the-quadrantid-swarm

I follow a similar format and prefer modules like mixers and sequencers and controllers on easy access lower row as I make changes on the fly more often than set and forget things like an oscillator in the top row. Some modulation sources like my new Acid Rain Maestro are on lower level next to sequencers and mixers as the Maestro is like a cross between a clock, hex lfo and sequencer that begs to be played live with frequent changes. Such a fun module!

Some more tinnitus (with a subtil reggae beat)

EDITED Dec 23rd 2020, 02:53

Really nice @Rassell!

Happy to, it's a cool crew here and I'm proud to be a part of it @the-erc

I've got a feature request...and hopefully it's easy enough to implement. If we could have a "date created" for builds (ie: the date when the build was started with an empty rack) along with the "last modified" date, that would be a big help in going back thru older builds I've got to clear space. And I'm betting others might want this for the same purpose, too.

@troux -- thanks for organising this! Amazing!

10 minutes should be good @the-erc, track accepted!

I'd love to contribute, although I don't really do "short". This is my personal favourite of my recent jams, although I have recently acquired a Werkstatt-01 and I feel something acidic may be about to happen...

If it's too long I can find a shorter one, but not much shorter.

Sick!

Good point...plus, when you de-case something like that and RE-case and power it in a Eurorack cab, you're actually increasing the cost of that synth because you then have to factor in how much EXTRA it costs per hp for things in your cab. As an example, the Arturia 2 x 88 cab there has a per hp cost of about $2.10. The Quadrantid Swarm streets for $549...but at 41 hp, it will wind up costing $635 and change when the cab space gets factored in.

If it's already in a case of its own...keep it there. It's cheaper and makes more sense.

The risk is actually more to the power supply...but quite often, when power supplies fail, they puke up a lot of overvoltages and other garbage. But if it's a Doepfer PSU3, those are pretty beefy and they're overspecced. Just rearrange your +12V load so that everything's a bit more load-balanced across the busboards...and actually, the evened-out load might be useful to lower other component stresses, such as the busboard filtering caps, etc.

One other thing I'd recommend would be to get one of Konstant Labs' 1 hp PWRchecker modules. They're conveniently sized, plus they do a bit more than just being an indicator that the busses are functional. Very smart little thing...and for US$28, they're a no-brainer if you don't already have some front panel rail voltage indicators.

Wow! I‘d love to be a part of it! Thanks for doing that! Great idea!

Yes youre right, i'll rearrange them on the rails. Is there some risk of damaging modules when coming close to the 2000ma?

Yes, i got the doepfer psu-3 case.

One note here, the Swarm has its own case and power I think, so you could host it separately and save a bunch of space in your rack.

1.85A is pushing it a little. It would be better if you can get that load figure lower, say down around 1.6A. This is easier on the "on the panel" supplies. But if we're talking some sort of heftier internal supply (like the Pitt ones, Doepfer PSU3, etc), this should be OK as those manufacturers tend to build some headroom into their P/Ss. If so, then just take some care to distribute the +12V rails' current load across the distro boards so that one of them isn't bearing the brunt of the current load while the other loafs along.

Careful...the 531 mixer doesn't have CV over levels, but over panning.

This build can't properly support huge modules, either. You need to sort out how to get the modules down in size so that you can make something usable here. One example would be the use of the SND/RTNs...you can get the same basic functionality out of a Ladik A-520 and P-520, with the sole difference being that you'd have to control your I/O levels on the stompboxes themselves. But as for the space difference...that would half that, and the COST...$78 sounds WAAAAAAY better than $500!

One other thing: you'll probably find that you'll hate having your control surfaces on the top row. In that position, you'll have patchcables all over them and they'll be a PITA to work. Bring them to the bottom row, then all you have in the way will be the 2s to/from patches.

Thanks for answer here.. So basically how close can i go to 2000MA? Would around 1850 be safe and no problem?

EDITED Dec 22nd 2020, 21:37

I believe in you @Lugia

Another couple of cabs I'd thumbs-up based on their power supplies would be ones from Erica and Pittsburgh. In the latter case (no pun intended), those are Monorocket designs, and Monorocket was always known for MASSIVE power overspeccing. The Pitt cabs are no exception. And the Erica stuff also goes overboard on amperage...even their 1 x 84 skiffs sport 1.25A 12V rails!

Might be a bit of a wait...between my accident this past spring and dealing with Covid-19 (ten day quarantine...feh), I would've expected the refit of the studio to be done had none of that happened. Set me back months, really...

Now I'm thinking, I wonder if we can get a @Lugia track out of this 🤔🤔🤔

Great!

Sounds great! Still enough time, at least for me, to build an exclusive for you 😉 👍

It'd be nice to get this done before EOY @zuggamasta, so maybe the 28th or 29th if that's doable? Archive pieces are accepted if that's a tight timeframe.

Big honor to be on your list.
What is your deadline/eta so we can take some preparations?

@wishbonebrewery I can relate, but I also have some somewhat clean files in the archive ;)
Just not named well, or named at all.

EDITED Dec 22nd 2020, 19:21

Everything you've posted so far's been rad @wishbonebrewery, WradioPhonik would fit in just fine!!

You mean I have to make a coherent, completed track and not delete the .wav file after uploading to Youtube?!

I've been working on live acid jams (@mylarmelodies has been a big inspo there) and dreaming about playing out post-Covid, hopefully should have something to share soon.

Thanks @troux.
Next project will be quite different. As always, I'm anxious to hear what you come up with in the future.

Also, listening to this again for the first time in a bit, great tune @farkas

Track #1 down, thanks @farkas! Now, who's next? 🙌

EDITED Dec 22nd 2020, 17:09

Sounds great. I would definitely buy that. Thanks for thinking of us ragtag bunch of lunatics. :)
Here's a link to one of my tracks if you would like to submit it:
https://ciernyvlk.bandcamp.com/track/drowning-in-positivity

Happy holidays to everyone!

I was thinking the other day about all the great tunes folks've posted here this year and how it's been a sort of a lifeline in this crazy time, and thought we should put together a Best Of ModularGrid comp for 2020, so I mentioned it to a friend running a small net label (https://communitymodularelectronic.bandcamp.com/music) and he loved the idea. If there's some interest here too I'd be happy to put it together and celebrate everybody's journeys in this crazy time. So! If you like the idea and want to contribute a track let me know! Since it's a netlabel and will be on bandcamp I think we can include anybody who wants to be a part of it, but if you submit a longer tune submit a shorter one too as backup, in case everybody wants to do a 17+ minute drone that is 🤣

So, here's looking at you @Exposure, @defragmenteur, @Rassell, @mowse, @sacguy71, @funbun, @aphew_goodman, @zuggamasta, @farkas, @yalivec, @GarfieldModular, @mog00, @wishbonebrewery, @the-erc, @cyberneticOhm, and anyone else I'm forgetting...

Thank you loads for all your thoghts to my system! @lugia I would love to invite you to my house for a couple of drinks and talk to you about modular gear and music :-) Thanks for all of your tips!

Happy Hollidays to all of you!

Hello all. I am building my first Eurorack rig based around a Minibrute 2S and a 6U Rackbrute. I will make techno with occasional excursions into other genres. My goals are:

1. To augment the Minibrute's voices (the Swarm and Indian Drum)
2. To get my outboard effects into the system (the 4 SND/RTNs)
3. Have a good filter

I plan to use the ES-8 to connect to VCV Rack. I can get EGs and LFOs there. I was thinking the VCAs might be redundant with the mixer has volume CV, but it might be good to create a voice and send that to one channel of the mixer?

Also I have all the drum boxes and samples I need for percussion.

Thank you.

Juan FTW! Quite a thing to compare ones own work to, though...it's almost like being a beginning modern-day poet, but having to 1:1 compare your work with Shakespeare's sonnets!
-- Lugia

Well I really only intended to compare to Shakespeare's kick drum, as it were...

Hi Lugia,

Thanks a lot for that stockhausen link, will check with them, seems they are located here in Germany, so should be easy for me then :-)

Thank you and kind regards, Garfield.

Fun piece @defragmenteur, I could almost see myself at a basement gig in the midwest, let's say 2008, with you giving us all tinnitus. Now where'd I leave my tallboy... 🤔

Listened to this again the other day @Exposure, really good work, hopefully we hear more soon.