User Posts

The thing w the wire touching the lip of the jack is not really doable on both sides because one side is an XLR (if I as non-native speaker understand the meaning of 'lip' right then there is no lip :D). The humming stops if I carefully wiggle the cable and then take care not to change its position/not to wiggle it any more.

What surprises me: it really sounds like a ground loop issue, but today I tried a 100USD hum eliminator and this had just no effect.

There is no humming if I plug in a headphone into teh 8NU8R, the humming only occurs with my active speakers.

EDITED Jul 31st 2018, 21:06

I recently started w modular and use the Malekko 8NU8R to get out audio to my speakers.

The issue is that as soon as I (accidentally) thouch the patch cable from the 8NU8R to the speaker the speaker starts humming and I can only stop it by unplugging/re-plugging the speaker. I have different cables from different manufacturers--no joy.

When I patch the cable to my Focusrite 2i2 soundcard instead and from there through the laptop/PC to the speaker all is fine and there is no humming if the patch cable is accidentally wiggled.

How can I improve this?