Yeah, the mix is a little loose, but that meldoy, its got the Vibes of a Russian Village Boys happy hardcore track.

Clock driven by Sport Modulator "Triple Rhythm Generator" patch.

[]

EDITED Today, 06:49

I want to buy an arcaico Mosè 6 channel mixer used on here. Does anyone have one they might be able to part with in the near future? I have my custom 104 HP 3 row Modular Grid setup the way I want pretty much but the one piece that's missing is the arcaico Mosè. I want one in Good or better condition on Paypal with around $100 shipping at the most to California. Is the Mosè released yet? arcaico's homepage doesn't list it and it didn't turn up on Google or Reverb.com.

Thanks for letting me know, I'll try to turn it down next time

different from the last one, what do u guys think honestly of this?
-- skyler

Maybe not bad – but the bass drum is way too loud!
On my sound system, it feels like all the other sounds are at just 10% volume.

different from the last one, what do u guys think honestly of this?

Flying high with Stepwise

Self patching one of the cv outputs into the root is something I'm doing a lot of at the moment because it adds a lot more complexity. I've not yet tried the same with the scale and MMS.

Been putting more effort into this project lately. Something I would like to get off the ground and maybe gig with.

A phaser with “overdrive”.
Very simple kit, mostly surface mount pre-installed only took 1/2 hour or so to solder the pots and jacks on and finish the assembly. I did need to file the switch opening a but, it was tight.

Interesting unit. Doesn’t really start having until you’ve got feedback way up, but when it does it’s good sounding. Adding CV for input volume spices it up quite nicely A fun unit, would be a great first kit.
[Build] ()

EDITED Thursday January 09, 17:24

Amazing

EDITED Thursday January 09, 16:01

Could you tell me more about the possibilities?

What seems attractive to me is, to modulate "scale", "MMS" and "root"

With Clank Chaos, it can sometimes take a bit until you find a sequence you like.
But you can save it, recall it and apply "just a small percent of random" and it mutates with very useful results.
But you have only one (assignable) CV control, to modulate + 1 cv too start / stop looping + 1 cv to apply new random.

I got a big problem with how PedalGrid's homepage is set for my desktop resolution. Upon first load, it looks like this:
-- Lovely_Listening_Aster

Thanks for reporting, should be fixed.

It seems like the Mutable Instruments Plaits page has disappeard, although the module is still listed in the Module Finder.
https://modulargrid.net/e/mutable-instruments-plaits

-- pawal

Looks good here?

-- modulargrid

It was like that for at least a couple of hours (the only module I discovered it on), but I guess it fixed itself?

This is a really really really great Sequencer.

Funnily enough, I'm in the opposite position. I like the GM as it's fairly simple to use but has some very interestimg possibilities. The scales are a bit limited but running them through a quantiser is easy enough.

Chaos looks like it needs a bit more work to get the desired results but the palette of options is more extensive.

MT2 is a very VERY nice module ! It got updated to 1.2. I did a in depth video :

Manufacturer Index Page

The new manufacturer index page lists all manufacturers per modular universe and answers the question of how many there are. Find it in the main nav.
https://modulargrid.net/e/vendors

This set was played using this setup

*dpo:
-lfo 모드선택
-Freq 1의 sin파 --> Maths 연결 이 두 조정 다이얼로... rings 의 strum(선율 뜯기)의 강도 조정
-Freq 1의 sin파의 다이얼로 현 뜯는 박자의 빠르기 조절!!!

*Pamela's Pro Workout:
-1 out 설정: x1, 사각파, width 65%, level 65%, probability 84%, flex op_HUMAN(amount 25%), Quantize_Minor,
-2 out 설정: x1, 연속계단파, level 90%, Probability 90%, flex op_HUMAN(amoutn 25%), Quantize_Minor

>
! DPO의 Freq 1 : 박자의 빠르기 조정(현 뜯기)
! RINGS의 Damping의 미세조절바(거의 최대CW)에서 가야금 뜯기 소리 가능
! RINGS의 Frequency 다이얼의 CW방향 중간이상부분에서 가야금 소리 설정가능
그외 Brightness, Position은 미세하게 톤 조절...

EDITED Wednesday January 08, 13:50

Hi :D

Any thoughts or experience on NE Gamut Repetitor vs Clank Chaos - for melodic sequencing?

I have a Clank Chaos and Im tempted to get a Gamut for doing melodic sequences, but I as Im thinking, the Chaos just has it all?

What about the musicallity results of the algorhitms?

I think something like:

Chaos:
like a 6 Channel Turinng Maschine with:
-individual randomisation of each channel
-control of individual channels
-global randomisation
-a few save slots to recall sequences

Gamut:
-4 Channel Turing Maschine
-only global randomisation
-no further control of individual channels
-some controls more accesable on front like "up/down", "root", "spread"
-no save slots

EDITED Wednesday January 08, 13:14

Thanks everyone for your replies!

https://audioparasites.com/ is thebway to go indeed!

Cheers!

You can get the panel here https://audioparasites.com . The knobs I got from here https://www.thonk.co.uk/shop/make-noise-mutable-style-knobs/ Just make sure you get the right knobs T18 Shaft.

Hi,

Anybody know where I could get a hold of the panel used in the 'Dysonant Edition' of the Piston Honda Mk3?

For reference:
https://modulargrid.net/e/industrial-music-electronics-piston-honda-mk3

EDITED Tuesday January 07, 11:53

https://modulargrid.net/e/toadstool-tech-ectocore

this seems a little strange... module, timing... etc...
its open source... i know... but...

-- Dub007

On request of the collaborators the manufacturer name was now changed to Infinite Digits x Toadstool Tech Ectocore.

this site is and likely always will be a hugely frustrating experience to use on mobile (*sighs.. christ alive, i hate that fuckin' cat)
-- Audeon_Visual

You can hide the cat in user settings.
https://modulargrid.net/e/users/edit

Search for miau

EDITED Monday January 06, 18:36

I got a big problem with how PedalGrid's homepage is set for my desktop resolution. Upon first load, it looks like this:
-- Lovely_Listening_Aster

Thanks for reporting, should be fixed.

It seems like the Mutable Instruments Plaits page has disappeard, although the module is still listed in the Module Finder.
https://modulargrid.net/e/mutable-instruments-plaits

-- pawal

Looks good here?

-You can not damage your eurorack modules during your basic patching. (like patching a audio module in a modulation module)
but you could crash your audio gear which comes after the eurorack, if you dont use a output-module and go out of your VCA-module without attenuation, with a (hot signal)
But with your Divkid Output-module you should be fine

-Always pay attention to connect the cables on the correct side with the red line. (otherwize damage to modules can happen)

-Be aware of your power consumption: which power your power supply can serve and how much power your modules need.
Some ppl say, its secure to to leave like 1/3 of the power cosumption unused.
Especially digital modules can be very power consuming.
Dont do things like, usinge 900 ma supply for 897 ma - better leave some space.
But as it seems that you might have a rackbrute 6u - that should all be fine.

Hi, I'd say you're quite fine and in line with what farkas wrote. I guess the confusing thing for you (and us with the way you wrote it) was the modulation. As farkas lines out, the sequencing and/or modulation typically starts out separately and the joins the audio path wherever you want to add the modulation. You can add the modulation to the FX (which is what I think you described) or to any other module that can modulate (whether intentially or not ;-).
Your rack seems to cover all bases (and actually more) so go and play. I cannot see anything that could go wron, even if you patch "incorrectly" - if there is such a thing.
...As long as you really take care in connecting the modules to power the right way round, but that's another story...
Play! Ron

A traditional subtractive patch would be something like...
Pitch sequencer > VCO v/oct input > Filter input > VCA input > Effect > Mixer
Gate/Trigger sequencer > Envelope generator > Filter/VCA CV input
LFO/S+H/Random/Noise > Whatever sounds cool

Good luck and have fun!

As the title states, im in need of help. i think i have a general understsnding of how the sound should be routed, but when dealing with an instrument that cost me just under 3 grand, id like to have a little more confidence in what im doing before putting live coltage theough my rack and possibly burning out a module or worse, blowing out my bus board. so im going to link my rack and anyone whos reading this post, feel free to build patches or reply with advice on how best to build a working patch. ill beging by kind of detailing how i think a basic patch is supposed to be routed. Feel free to let me know im wrong. So from all the tutorials ive watched i think the correct pathway should be sound source/VCO out>envelope gen in>env. gen. out>filter in>filter's mix out>modulation/fx/lfo in>mod/fx/lfo mix out/VCA in>VCA out>mixer imixer's stereo out>audio interface line in>interface line out>external mixer channel# in>external mixer stereo out>monitors/phones. am i close? i feel like j need an audio engineering degree to be able to effextively learn this thing lol. https://cdn.modulargrid.net/img/racks/modulargrid_2725653.jpg

EDITED Monday January 06, 08:40

Haha, Thanks, and Harsh, and I don't care about the video.

Beautiful theatrical patch.
Give more attention to your video that matches your audio. 18 minutes footage from 1 angle is boring.

Cool, ive never seen that module before. I'll have to look into it. :-D

EDITED Sunday January 05, 18:57

I have the Jomox bass drum module and love it through Mutant Hot Glue compressor/mixer in my 4u case. So good!

I've spotted myself doing this, having a good stare at my modular racks on MG, seeing an idea take shape in my head then later patching it up for real?

something like this maybe: https://modulargrid.net/e/transient-modules-4r

or this if you want more pitched/quantized CV: https://modulargrid.net/e/doepfer-a-149-4

😍😍😍

I thought the snow outside went well with this patch.

Rings into monsoon Clouds
Rings into Veno-Echo
Rings into Mineophon
Filtered and Panned Noise
Marbles for Triggers, 2hp ARP for note CV

EDITED Sunday January 05, 11:49

Mpc sketch in the winter cold

are there any similar products availible ?

Which alternatives are there availible on the Market ?

i love the jomox modbase09mkii... sequenced by the iolabs flux&idum...

EDITED Sunday January 05, 08:56

check this:
https://modulargrid.net/e/skull-circuits-metal-o-tron-ii

but try the SSF, it´s awesome

metal tron too

EDITED Saturday January 04, 21:07

Which alternatives are there availible on the Market ?

Sehr interessantes Modul

Genau das Ding brauch Ich !