All Posts

Discovering any Bugs? Post here!
-- modulargrid

The primary version of KOMA Dual Discrete VCA cannot be added to a rack. Choosing either version from the module page adds the alternative version picture. This started some months ago. Before that it worked fine.

Very beautiful piece, positive and sunny!

Thanks @Progspiration for getting us back on the right path, we should have known something was wrong :))
Thinking about this presence of an original MI Clouds, we could perhaps justify it by a desire to own a collector's item... it's not my thing, but I could understand.

Hi you all !

EDITED Oct 13th, 10:49

The 2 clouds threw me off at first too, but reading the original description closer, the 1st row is what they have already and the 2nd row is proposed next steps. I also agree a smaller/more flexible clouds clone is a good step though

Howdy folks! I haven't posted here in a while, mostly because I haven't completed any recordings recently. I have been checking out/enjoying other posts here though. :-)

I have been busy recording, just not publishing stuff, and also enjoying a lot of DIY projects. I recently completed building the venerable Klee Sequencer and here's my first recording with it. Cheers!

https://m.

@VONDENFUNKEN is right.
Yes, not only will one Clouds be enough and I personaly even suggest replacing it with an excellent clone like Monsoon: smaller and more complete. And don't forget Beads (Emilie said Clouds was "a mistake", and at the end of MI, she created Beads).
https://en.clockfacemodular.com/blogs/waveguide/interview-with-designers-emilie-gillet-mutable-instruments

Why 2 clouds?

I would drop the behringer envelope and get something else. (or use maths for envelopes)
+ drop the behringer vcas and mixer - and look for something like a Veils or Quad Vca with more Vcas in one module
I like Nano Modules ONA as standard vco (its small hp)
I would drop all the behringer - even the low pass filter, there are other cool filters in this hp.

Maybe think about it a bit more

Don't buy anything from @freesolo337. I will summarise my experience with him:

1 - On the 17th of August I bought a Mutable Ripples V2 from him, I sent the money and he sent the module on the 22nd.

2 - The module should have arrived at my house on August 27th but it could not be delivered. Apparently because the address on the package was incorrect, so the Spanish postal system informed me that it would be returned to Ireland. I informed @freesolo337 of this situation and he opened an incident case with the Irish postal service.

3 - A few days passed without any update. I called both the Spanish and Irish services several times; the package was still in Spain but no one knew where it was. After calling persistently for weeks I managed to get it located and sent to Ireland.

4 - The package was lost again. After calling several times and sending dozens of emails, I found out that it was blocked in customs. I had to call again over and over again and managed to get it unblocked so that it could be returned to Ireland. Throughout this whole process, @freesolo337 did nothing about it.

5 - When the package finally arrives in Ireland (12th September), it can't be delivered to @freesolo337 because there is no return address. I was told by the Irish service that @freesolo337 had to fill in a form to get the parcel back. He decided not to do so because he had already filled out a form (step 2) and apparently filling out another one was too much work for him.

6 - Since 12 September I have asked him for the incident case number of the form he opened. He has not sent it to me. The last message from him is from 17 September telling me that he had already filled in a form and that he will let me know. Since then I have not heard anything more from him, he has ignored all my messages for weeks and I am without my money and without the module I bought. I have been ripped off :(
-- nin993

Just for you to know: after one month of ignoring every single message I sent to him and after almost two months of this situation, @freesolo337 decided to appear and give me negative feedback for...whatever reason. I never imagined there could be people like these in the modular community, it's so sad and disappointing.

UPDATE: He has deleted his account in case there were any doubts about how childish and scammer this guy is. And now, the guy created 3 fake accounts just for downvoting me. It's incredible having to see this after getting scammed by him. He already has my money and my module but apparently it's not enough for him. Be careful because you can find truly awful people here.

EDITED Oct 13th, 19:21

+1 for Marbles.
+1 for Rnd Step.
= +2 :))

-1 on getting rid of Maths, it's a superb module and opens up so much modulation possibility (and also has some dang snappy envelopes). And rather than a Marbles I'd suggest getting something like Divkid's RND Step which gives you a bunch of sample and holds with internal random sources. Throw in a couple ring modulators, let's say Intellijel's Amps module, and you have many of the foundational pieces that make modulation possible and fun, which after all is the point of modular!

Just my 2 cents.

EDITED Oct 12th, 03:04

Is there a way to lock a module in position in a rack, so it will stay locked in position when aligning other modules around it using the keyboard shortcuts?

Marbles is great fun and super useful!

Since this is your first rack regardless of what you get now, you will have a completely different point of view after using the rack a few months.

I would ditch both clouds and the maths and learn to use just the two subtractive voices you have set up now for a few months.

Then you will know what else you need.

I totally agree! A couple days ago I happened to post a similar request on the ModWiggler forum:

From https://modwiggler.com/forum/viewtopic.php?p=4237599#p4237599

One gripe I have about module entries that are "Approved by manufacturer" locked is that many manufacturers are not very good at keeping on top of updating their modules on ModularGrid! And the method of getting the manufacturers to update changes or correct mistakes by sending a message is sort of tedious/cumbersome and no guarantee that the change will take place or the request even read, since ModularGrid is often a low priority for them or worse yet they've gone out of business or passed on. 😔

I think a better method might be to set up a "Pending Change" status so that end users can use the normal tools to make changes to a locked "Approved by manufacturer" module but the changes wouldn't take place until the manufacturer takes action on the pending request (approves, rejects, or doesn't respond for a certain period of time, at least a week but no more than a month?) While a request is pending no more changes/pending requests can be made on that module. This way it would be more streamlined for both users and manufacturers and modules that were locked by manufacturers that don't care or are MIA can still be updated in a reasonable amount of time. (which will also reduce the need to end users to create duplicate module entries that can be edited)

how do you connect the Qx remote to the Quadrax?
-- alexangi

It just connects with a standard I2C ribbon cable. Currently I just have my Qx connected to my Metropolix, but it's compatible with Quadrax, Matropolix and Planar2.

Anyone going to Machina Bristronica 2024?
If you see a chubby guy who needs a haircut, say hello!

hello,
does anyone know what capabilities do this extension module provide on the 1u plum audio ornament and crime (phazerville firmware) ?
thank you :)

how do you connect the Qx remote to the Quadrax?

What was your plan for it when you got it?

EDITED Oct 10th, 00:11

This thing sounds absolutely awful. It doesn't create either interesting musical sounds, or interesting non-musical sounds. The sequencer is great, its the only thing going for it. But at $600 there are far better sequncers to get. It's not much use having a huge semi-modualr with a really cool sequencer, that sounds horrible in every other capacity. Further, you can tell that the Moog quality has severely dropped. The first three semi-modulars they put out all had really well done manuals with super useful starting patches. The manual for this is pretty sparse, and having gone through all the starting patches they had, I can't think of a single use for any of them.

Amazing modulation module and I have a lot of them! I finally found a user interface that suits me, everything is logical, well designed, practical and designed for a live game.
The strength of this module is to have 8 outputs at 8 hp and it is bipolar.
I love it so much that I'm thinking of buying a second one!

Yes, the switches you propose have a lot of sense I guess.
Passive multis doesn't work well for audio signals, so I got it the reason for your first proposition. Anyway, for me they are superuseful, not only for audio (that's mainly the reason I use buffered), for modulation too. Ambient music with a lot of modulation is more fun for me :)

But yes, fair enough switch minimix, xaoc dsp and one vails for bartender and barback, even if probably I'll miss the xaoc dsp, it's the best solution I think.

patch notes in the youtube link

I have two original tiptop power bricks, each one output 13 V, 3.07 A max. No problem since day one.
the amperage in you case seems low, what power brick are you using? although it's strange if the uZeus rail indicators blinks even with one module plugged in..
Have you tried to remove/swap all the busboards? If it blinks even without busboards connected to the header the uZeus could have an issue. Have you inspected the back of the module? alla caps are in place?

That's very fair! I think I'm used to just running stack cables and hex/outboard passive mults that I often don't think of them as necessary, but that's my own workflow. What you're doing sounds super cool! My vote would probably be to drop Minimix, Xaoc DSP, and maybe one veils, and add the Bartender/Barback combo to mix. Whatever configuration you end up with, would love to hear what you make! Cheers friend

Hi,
thanks for the advise with the jumper.
I removed it but unfortunatly it still flashes.
With your hint, I could find other threats with simmilar problems.
I even tried to plug in the cables of single modules to doublecheck, if its maybe because of the higher start up power consumption but it still flashes..
Could it be the cable from the wall wart?
It runs13,5V / 1.11A

EDITED Oct 7th, 13:22

Hey! thanks for the suggestions.

I guess it's difficult to decide which modules drop or not. But buff mults and jugle henge isn't sure not to drop. I use so much the multis for audio, cloning signals for sending to differents effects and depends on patch, using jungle henge to create a new full stereo spectrum audio mix with only one source. For example: rings to multi, one dry signal from multi to JH, another to clouds, clouds to JH, another from multi to prism and finally prism to JH. Like that I have 5 audio signals from rings dry + wet to put into JH and play around the spectrum. Love the results of this kind of patch around Jungle Henge and multis, I consider they are so lush and give me an ambient signature for my music I love so much. It's true JH is better partnered with veils (or whatever VCAs) on this kind of patches.

In other hand, sometime I use bitbox micro as a kind of drum machine and Jungle Henge seems perfect to mix all drum kits placing into the stereo spectrum.

Maybe I could drop the Xaoc DSP cause i have to use all effects as an inserts because my mixer. If I switch to a mixer with sends/returns I won't need so much.

EDITED Oct 7th, 09:34

If you want this all to have a certain rhythmic undercurrent, Pam's is probably the way to go. Also, a Toppobrillo Sport Modulator seems like it'd be a good calls for a noise/ambient case like this as well - lots of opportunities for going from modulation to audio rate oscillation and everywhere in between. I think it would fit this setup particularly well for how it can be both a self-contained drone synth in its own right as well as a toolbox for your modular setup.

An attenuverter or VCA would also be helpful here to give the textures even more movement and fill more space.

So I got a bug up my ass and was going to sell all of my mods. I sold a little over half of what I owned before I had sellers remorse and decided to keep the rest. Based on what I have here, I want to fill in the rest of the space with mods that woud compliment what is there for chill drone and ambient noise and spacescape type stuff. I also might try to make some glitchy randomness ala Autechre type stuff. Any advice?

This is the rack as it sits on my desk today.

Here ya go, I used my ancient samari search techniques.

glad you mentioned this as I've never seen it
https://archive.org/download/braids-illustrated-1.8/Braids%20Illustrated1.8.pdf

EDITED Oct 6th, 23:10

I've personally had really good luck with the modules I've gotten from After Later, both new and used. I haven't used the Bartender/Barback mixers, but they do seem to fill the functions you'd want! Boy I'd miss having the Veils though, they're really great VCAs. I'd sooner drop both of the buffered mults and probably Jungle Henge as well. That would get you most of way to the 34 hp required, but would have some trickier decisions for the last few hp. How much are you using the that Xaoc DSP? The combo of Beads and the Versio modules as well as Prism feels like it could be enough effects. I'd maybe be inclined to pull that out if mixing is the priority at the moment. I don't envy those hard choices!! The good news is you can always buy another rack to house the stuff you're not ising here haha

Thanks Sweelinck! Glad you liked it.

To quote “The idea behind GOMA was to make an improved version of the classic 3 Attenuator/Attenuverter modules.”
And that’s what it is. Mostly surface mount already installed, pretty simple build.
And it works just fine, very high fidelity between the input and output signals, and it attenuates and reverses the waveform just fine.
Good module.

Build

Hey, thanks for the suggestions, I'd check those.
I've found the nightlife mixer series from afterlater pretty interesing too. Even if I don't like that brand in general, I see this mixer: bartender; plus the expander Barback, could be fit good on my rack taking off two veils and minimix.
What do you think with this one?

Nice tracks, interesting patch informations. Thanks!

I want to say thanks to you all for the useful suggestions. I already changed it around a bit and removed an osc for some more filtering (Wasp).

I wasn't looking at the Ochd expander but extra logic to do nifty things to my CV as I had some space left when processing other tips I got here, so I added that. I like logic operations in VCV Rack and was missing that in the hardware.

I also already noticed the Expert Sleepers interface. I like it. Surely keeping an eye on that one as it opens many doors via VCV Rack. It might even free up more space as it could stand in for other functions via VCV Rack modules.

I haven't had time yet to consider all the other tips you gave but I will. Thanks a bunch!

Not sure if it's intentional or not, but the module next to the Ochd is not the expansion, but the logic module Eas that looks very similar.
Since there's no mention of it (that I can find) in your post I thought it may be an oversight. Apologies if it isn't.

Here's another idea.

BIA + Crust are a prettty potent voice combo, backed up by samples from Disting. Font is there because a filter is always good.

Beatstep Pro is the trigger sequencer : 6 channels go to BIA, Crust, Skis x 2, possibly Disting x 2.

Pams + Tetrapad handle other modulation, backed up by BSP. The Doepfer quad switch is a modulation director. I also added the Xodes AC3 here, because I had 3hp left, and I don't have any 3hp wide modules, and it seemed like fun. But maybe another EG would be more useful here.

Output stage is the Instruo Carn + ALM HPO. Carn is very expensive but it has faders, a soft limiter on the output, and a little more flexibility than a straight up mixer. I would need to buy both of these. :-(

-- Zacksname

This is probably what I would do under those conditions to achieve what you're describing.

This one is the opposite extreme to Teataine's version. And I also like it! It's probably a bit closer to where I would have gone.

You can fill up the Disting with samples and stuff before you go so there's plenty of extra drum options.

My thoughts exactly.

Even if you take the Beatstep Pro, I think the Pam's, Tetrapad and Tete are unavoidable here. They seem to be most of your modulation and playability.

With all that modulation power, the Beatstep might be redundant indeed. Although sometimes you just want to punch in the drum pattern, so I would probably take it regardless. Could be useful if ever needed to get clock from the computer too, although I have never done that before, there's first time for everything.

Since this one requires only things I already have, I might just put it together and see how I like it!

Nice ideas -- thanks!

-- teataine
Interesting challenge, here's my attempt:

You managed to keep a lot more than I expected! Also, I did not know about that Traffic module... I have spent so much time deep in Pam's trying to achieve such an effect

I added an A-138s and a Bastl Ciao!. If your chosen USB interface can take modular levels, then I would replace the Ciao

OTOH, if the audio interface has 4 channels, I could do the mixing in the box. This selection tops out at six outputs, so a little 2hp mixer could replace the A-138s. Mixing on the computer is not as fun though!

The Disting is worth keeping in such a small case because it can do so many different things.

I suspect it'll be playing samples most of the time, but yeah, this is a mandatory pick

The DFAM is also amazing but people usually point out it's a waste to have it mounted in a rack, especially a small one. I'd seriously consider keeping it as a separate unit tho.

People always say that, but I think it's backwards. Don't think of it as putting a DFAM in a case, think of it as making a DFAM++. Anyway I thought about that a lot quite a lot, and I think DFAM + 4hp of power doesn't leave enough quite enough space, especially if you need to squeeze some kind of mixer in there.

Thanks for the suggestions!

There’s a tintinnabuli option hidden in Disting EX’s “chord engine” algorithm, and it’s led me down the Arvo Part rabbit hole.  Here are some ideas on how his unique and beautiful approach to music might be implemented in a modular system. Detailed patch notes in the video:

Easy to fix ourself.
plug it in and feel wich chips get hot
all socketed, easy fix, cheap fix
it's all TTL CMOS and some OPAMPS

doing self will cost you... maybe....10 bucks.

Thanks. I really appreciate this. It still doesn't work cos I fried it but it's booked with a repairer so hopefully it'll coe back fine

@nin993
In these cases you can't claim the money through paypal? Did you use f&f?

And it's really simple.

STEP 1
Pull out the plug from ST1 on the 155
(Keep cable cause it can still be used as buscable if you ever loose or destroy one)
But for now, aside with it.
ST1 wil NO LONGER BE USED

STEP 2
Next to the plug you just remove sits a second, it's twisted and sits on ST2 next to ST1
Pull out the plug and fold aside for a moment.
THIS WILL CONNECT LATER TO CABLE B plug 1 (B1) in step 4

STEP 3
Look at the 154 and notice there are 3 cables
cable one is the buspower, it has the 18pole plug at it's end, at this moment not yet needed.
Cable 2 is called A
Plug this cable onto ST2 this is the connector on that led board that is NOT on the edge
AGAIN: st1 at the edge REMAINS EMPTY
Red stripe goes down, closest to the edge of the board

STEP4
From the 154 comes a longer cable with 2 connectors pressed to it. They call it B
Both connectors are protected agains shorts with a blind connector.
Manual say you should use the connector at the end called B1
Remove the blind connector from B1, leave the pins in.
Okay? Got it?
Now you should have connector B1 in your hand (yes the one at the end)
At step 2 I asked you to fold away the cable you removed from ST2
LOOK CLOSELY AT THE RED STRIPES and plug the cables together,
My cable from the 154 has not a massive colored stripe but is more some kind of red stipled line
Whatever:
RED GOES TO RED

Remark:
Cable B has two connectors
The second one is ment for your second A-155
You may however swap B1 with B2 if that suits your cable management better
These 2 are 100% the same, it can't go wrong here.

EDITED Nov 6th, 12:05

Don't buy anything from @freesolo337. I will summarise my experience with him:

1 - On the 17th of August I bought a Mutable Ripples V2 from him, I sent the money and he sent the module on the 22nd.

2 - The module should have arrived at my house on August 27th but it could not be delivered. Apparently because the address on the package was incorrect, so the Spanish postal system informed me that it would be returned to Ireland. I informed @freesolo337 of this situation and he opened an incident case with the Irish postal service.

3 - A few days passed without any update. I called both the Spanish and Irish services several times; the package was still in Spain but no one knew where it was. After calling persistently for weeks I managed to get it located and sent to Ireland.

4 - The package was lost again. After calling several times and sending dozens of emails, I found out that it was blocked in customs. I had to call again over and over again and managed to get it unblocked so that it could be returned to Ireland. Throughout this whole process, @freesolo337 did nothing about it.

5 - When the package finally arrives in Ireland (12th September), it can't be delivered to @freesolo337 because there is no return address. I was told by the Irish service that @freesolo337 had to fill in a form to get the parcel back. He decided not to do so because he had already filled out a form (step 2) and apparently filling out another one was too much work for him.

6 - Since 12 September I have asked him for the incident case number of the form he opened. He has not sent it to me. The last message from him is from 17 September telling me that he had already filled in a form and that he will let me know. Since then I have not heard anything more from him, he has ignored all my messages for weeks and I am without my money and without the module I bought. I have been ripped off :(

https://sunshine-jones.com/doepfer-a-155-a-154-connections/

Hi

Yes that's what I figured but having followed the instructions I'm not sure why it blew. That's why I'm asking if anyone has another pic. I'll have it repaired and then need to make sure it's wired correctly so it doesn't happen again.

You have blown one or both modules,
connecting isn't that difficult but first it needs to be repaired.