How is the current available sizes not suiting you? I'm already using the racks to figure out what to put in my three Pods.
How is the current available sizes not suiting you? I'm already using the racks to figure out what to put in my three Pods.
https://www.modulargrid.net/e/forum/posts/index/user_id:158083 added lots of chinese spam posts which I deleted manually.
Note: I got a great deal on that moog clone, and I'm on a budget so an "all in one" kinda synth voice thing was something I wanted to get first.
Let me know if there's anything that seems redundant or anything that is missing, or if there's cheaper versions of things I should get. The only thing I've got so far is the moog clone. I've never had a modular before and this is just a first draft. I got a PSU and tiptop happy ending kit with 126hp rails on it.
Appreciate any help and I'm excited to get into this!
https://cdn.modulargrid.net/img/racks/modulargrid_901118.jpg
Tom
Thx Ronin..
For now I ordered the Fold Proc., first I have to research what that brought me when I got that module.
But when I want to add another voice I will keep your words in mind.
I am not a expert yet, but looking at other racks give me inspiration too ..
I noticed 2 things .
1) MI Peaks, that module is not available anymore, off course it is possible you have it already, or that you can find it on second hand market. or there could be a clone, but I thought better to write it down, to be sure.
2) what Ronin said about the Function, you can also apply to the Contour, but the contour is fully ADSR, if you want that, it is a good choice.
(I have a Contour too, and maths is still on my wish-list, but i have 2 rows, and am planning to go to 3 rows)
Thank you for your taking the time to share your knowledge!
I will continue my research with these thoughts in mind!
On the fundamental side... where are the envelope generators? A couple of Tip Top Z4000 ADSRs would go nicely here. Each stage can be modulated and there are pots to control the level of the envelope as well as invert it.
In the 1U world. Why do you have the 1U reverb with a nice ErbeVerb in your rack? Ditch that little thing.
The line out 1U... get rid of it too. It's just not worth it. You have two line level ins and out assuming you're in an Intellijel case.
With the space saved on the Line Out and Reverb, put in another Quadratt. You'll thank me later.
That 16 space hole is perfect for an 8HP Ornaments & Crime and an 8HP Temps Utile. I love them because they are SO multifunctional and EASY to adjust. The menus are very simple to get through once you understand how to navigate.
Are you really in love with the Rain Maker? It's a lot of real estate and relatively expensive. Plus I believe they are backordered. 36 HP can be filled with a lot of love as far as effects. Unless the Rain Maker is integral, I would save it for a larger version of your build. Tough choice.
Check all of your Mutable Instrument modules for compatible clones. The clones run the same software and have the same components. They are just generally more compact. Using the clones will give you more room in your case for future expansion (assuming your power supply can accommodate the additional power usage). Check out Michigan Synthworks for some decent Mutable clones.
The Make Noise Function is basically half of Maths. Any reason for this module? That 8HP can go to something a little more useful like Temps Utile or an Ornaments & Crime (two of my favorite modules, I keep mentioning them). You'll get a LOT more use out of one of those than the Function. Replace the Function, clock divider and Disting with TU and OC and I think you'd be happier in the end. Oh, you can also get rid of the Euclids module with the TU and buy back 2HP. The TU is around $250, so that one Euclids module covers half of the expense.
I do not see a filter. A small multimode filter would be great in this rack.
But back to the first point. Redesign this rack with Mutable clones and then consider what to do with the extra space.
Thank you for your recomendation ..much apreciated.
Main reason I want to put those on a case is so I can carry them to a friends studio for jamming...They do take a lot of rack space but they give a lot too.. I want them to be properly packed if I am going to move them around. As for the rear outputs/inputs I can just move them to the side of the rack, just will need some sort cables and DIY work. Both synths also offer audio out on the patch bay. It is also true that I do not need to build the case right now, I have first to get to know them well at home.
Well, regarding modules math comes always a one of the most recomended modules, I think is quite complex but can do lots of thing. For example turning the DFAM into a Subharmonicon .
In fact I already bought one secondhand (ups!!), a never used mk2 still under warranty for 220€, I could not say no. ;-) It can wait in the drawer a couple of months if necessary, first I ´ll get to know both the Neutron and DFAM.
The disting comes also recommended but after your feedback I think I will just pass. Main reason to go modular is to have full hands on with no menus, Disting does look like a pain in the ass. The other modules have not been thought thoroughly though.
I still do not have the CV.ocd with me but I guess will serve me to route some modulation/trigers from reaktor blocks to the modular. I do not think I will need the Gate/boost as as far as I know all trigger/gates do respond to 5v. Also one of the neutrons midi cc´s can be assignt to a cv out, there is also a midi gate cv out present.
As I said before I also own a Bastle Kastle, I saw ST modular sell a DIY eurorack version of it, I may try to convert mine.
http://www.st-modular.com/eurokastle.htm
Thank you for your list of recommended modules, I will look into them. Still my budget for hardware is 2000€, which I will spend sooner or later (rather do that on hardware than partying.. money burns in my pocket :-)). So far DFAM 520€ new B-stock, Neutron 275 new B-stock, CV.ocd 130€ Maths mk2 220€ second hand under warranty. That makes 1145€ so far...
As I said before I also own a Bastle Kastle, I saw ST modular sell a DIY eurorack version of it, I may try to convert mine.
If I make my own case I think I can do a nice one for less than 200/300€, flight case like; I think I would go for a meanwell RT65B PSU and a single busboard. There would be no much difference in price in making this or a small 3U 40HP case. The RT65B delivers up to 2.4A on +12 and up to 1A in -12 if not under full load, also has +5V altough I do not think I will need it.
Neutron is quite power hungry, according to Behringer 1A but I red somewhere is more like 700mAh. 1.5A might be enough for the whole thing but I preffer not to force the PSU. It will need to feed around 4 to 6 modules, maximum.
Other recommendations regarding PSU/Busboard combo will be apreciated too; 200€ tops
If I add the ST Modular Kastle to the set up it would mean going for a 6U 90HP case, I would have 10 HP empty space to add something in the future ( out of the modules you recommend one could fit, as there is even an 8hp version of temps, uTemps).
Regards
Javier
I separated piece into 3 parts(melody, chord, bass) to manage polyphony
Oscillators
2x Rings : 1 for melody, 1 for chords
Plaits : bass
Envelope and Filter
A-111-5
Mixers
A138s and Quad VCA
Hope you enjoy and please subscribe my youtube channel:)
The post is interesting. It explores 2019 Eurorack. You can find an image along with the article and it can tell you everything that you need to know. If you go through the image carefully, you will get to know what it is and what it is saying.
Thanks,
https://essayschief.com
Newbie - Ready to purchase and fill my new Synthrotek Skiff Boat 104 HP. Can anyone help me decide if these modules are appropriate together and if the primary parts are there for an ambient generative system? Thanks all
Plaits is the next generation of Braids. I own the Braids module. The Plaits has more possibilities, but the Braids at least has a crude screen for menu diving. However the Braids is higher in fidelity and has more options.
Plaits/Braids are great when you want a sound quickly without a lot of patching and tweaking. If you're short on kit, then they have some great options. Braids can quantize your CV for you as well as apply its own attack/decay if you wish. If you get the micro-version, it's pretty handy to keep around for that extra voice to add some depth to your patch (like a counter melody or some background funky-ness). But 99% of the time, it's not my go-to module as it lacks a lot of features you'll find on a traditional oscillator.
Take the DFAM and the Neutron out of the rack. The line-level outputs and MIDI are on the top of the unit. I think the same applies to the DFAM audio out (don't own one). By putting them in the rack you create new problems to solve at this point. Once you get going on modular, you'll want that rack space back.
As far as your modules... why? What will the Maths , Disting, and clock divider do for you and your set-up? What are the capabilities of the cv.ocd? Can IT generate clocks based on MIDI clock from your DAW or possibly a dummy MIDI clip running at the clock speed you desire? Can it support more than one clock? You'll probably want to clock the DFAM if you're using its internal sequencer alongside your DAW. You might need the Gate-Boost option for the cd.ocd.
You have the cv.ocd, the DFAM, and the Neutron at the moment. I would see how much you can get out of that set-up BEFORE you venture any further or bother with a rack or modules. I think you need some experience in using your new gear before augmenting it. You'll save yourself a lot of time and grief.
When you are ready to add more possibilities, I swear by the Temps Utile, Ornaments & Crime, as well as the Noise Engineering Mimitec Digitalis. With those three, you should be able to get some really nice modulation, and pattern generation. O&C and TU have a lot of possible functions like Eclidean patterns, quantizers, quad LFOs, etc. The Mimetic I find really useful since it has four 16-note CV sequencers in it and can be CV controlled to alter its patterns. Check out some Youtube videos on them and see if they are your cup-of-tea. I also have the Disting. But when I'm in the creative zone, having to break out the manual to figure out where the patch I want is and what parameters I can control tends to suck me out of my creative space and back into my daily technical life. The module is very powerful compared to its price... but it's so bloody hard to use.
That's my opinion and it's not necessarily the right one for you. But that's the advice I'd give you face-to-face if you were about to drop a lot of money on gear.
I've been sad all day long...
Hello,
I am new to modulargrid, beautiful site indeed...
I want to make an eurorack system, to feed my NI Maschine based set up.I do not intend to make songs (I have never been good at it) but rather evolving sesions live like; anything between IDM, Acid and Dark Techno.
In the computer I will be using Maschine MK3 and JAM, Maschine software, reaktor blocks, Maschine Drumsynths and maybe will add Softube modular, as the basic package is quite cheap. Also have some other VST synths
I want to make a 2x84hp eurorack system with Moog DFAM and Behringer Neutron as main sound sources and add a few modules to it. I also own a Bastl Kastle which will integrate fine as has two cv I/O.
To comunicate with the compouter with the system I bought a cv.ocd.
I also have some guitar FX from my grindcore days (Metalzone, compressor, Phaser, eq..etc)
I will use the two audio inputs in my Kontrol audio 1 to feed both the Neutron and DFAM main outputs to the computer and sample and/or add extra FX. Also I can use the two extra outputs on the Kontrol 1 to send audio (extra oscilators, drumloops, etc..) into both DFAM/Neutron
I already bought both DFAM and Neutron; the modules I have thought off are Maths, ModDemix, Disting mk4 and to fill the 2hp gap maybe a clock divider/multiplier? I will make my own case with Doepfer DIY kit (I have just realiced the whole set up draws more than 1.2 amp...Maybe I could dissasemble the PSU from the neutron and fix it to the case, so the neutron would have its own psu and the rest the Doepfer rail.)
The cost will be 790€ for the DFAM/Neutron combo, another 700€ for the modules and around 200€ for the case. Even adding the Bastle Kastle and the cv it does not reach 2000€.
As I am making my own case I can also leave a 1Ux84 rack space empty on top to add some extra functions
Any thougths welcome
Without you there would be no ModularGrid. Rest in peace, Mike McGrath
Beep, Bopp, Bleep: info@modulargrid.net
Hello out there,
i am producing music (like we all do in a way...)
and my latest album is going to be released on the 2.May,
200 pieces on coloured 180gr Vinyl only
digital download through my bandcamp site
it will be distributed by Cineploit records (cineploit.com)
i made it by using eurorack modules only,
so maybe some of you want to give it a listen:
thelema-music.bandcamp.com
thank you for your ears
greetings from Austria
Ha thanks, I think I got my final idea for that part :
My current idea is that first of all I will go for the Fold Processor, then the Doepfer A-110-6, and keep Plaits as an option if (or when) there is budget enough for it. Better to have that with good partner modules in the house.
My next point of interest is sequencers (thinking of that in a broad way). I have the MiniBrute 2S (and also the Keystep) but I also want something in the rack itself, I will receive the sequential switch (doepfer version) soon, but there are also some options I like to consider:
I like the doepfer A-155 because it looks really easy to use.
But besides the size , I think I miss one important option, a kind of 'end of loop' mechanisn/output.
I think in functionality the Varigate 4+ is a very good one, but I think it is really a little harder to use because you use the same sliders for different settings, and that makes that it has a less good overview, and also this looks more difficult for live performances.
I think the voltage block has a better overview, but it is also big and I think it takes a little too much out of my budget for the kind of module it is.
MI Stages is not a real sequencer I think, but it comes close in my eyes and it is easy expandable, to have more stages or other kind of sequencer like modules connected. So it is very fexible in my eyes.
Then I like the Pittsburg Lifeforms Micro Sequence, it looks like a good mixture of value for the bucks and easy to use,. bnt in a small package.
Anyone a thought or 2 on this subject ?
Totally different...the A-110-6 is an analog VCO/LFO with the appropriate circuitry for TZFM and quadrature outputs, while the Plaits is a microprocessor-based digital oscillator with several very useful synthesis methods. While it might seem that that might not be a "proper match", the fact is that the A-110-6 is one of the analog VCOs that has the timbral complexity potential to hold its own against the Plaits when in use as a VCO, and has ample quadrature-phased waveform outputs for LFO use that can make the Plaits go morphing-bonkers when using the A-110-6 in that mode.
Which brings up another point: when looking at modules, always also look at how certain modules can synergize with each other. In this case, you could opt for two different sets of possible uses, both with some major sonic plusses to them...but if there's two that are obvious enough on the surface, there's apt to be MUCH more lurking there, waiting to be discovered once they're in a cab.
Ok, that is 1 down .. the Dixie II+ is now disappearing from my path tot my 3th gen Rack, (maybe there will ever be a 4th gen, we will see then again with the Dixie III ++ maybe), still need to upgrade the newer racks.
I will try to dig up some video's with the A-1110-6..
What is your take on the MI Plaits? I really liked the demo of that sweet thing .. How would you compare that to the A-110-6 ?
Comments/ideas/critique welcomed.
Hi All,
First time poster, long time reader here... I have started this build, my intention is for it to be a processor/manipulator of external sound as well as a producer of sound. My knowledge is intermediate i.e i still find myself making mistakes with module selection as my knowledge of what is useful is limited. This is where you come in. Could you please help me piece this baby out. I have included almost everything I own and a couple of wish list pieces in this so far, some of this may be redundant if you think so let me know.
anyway... over to you
Thanks in advance!
Another thing to keep in mind is that the Tiptop Fold has a suboctave divider; you can get up to four octaves down from your initial pitch with that. That would kind of disqualify the DixieII+, since you'd be duplicating a function with it that's better-implemented in the Fold. Instead, try and aim for adding more modulation possibilities with the VCO choices while maintaining cost-effectiveness. That Doepfer A-110-6, for example, is $21 more than the DixieII+...but it gives you quadrature outputs both as a VCO and LFO, has thru-zero FM capability, plus both linear and exponential FM. This makes it useful as a modulation source in LFO mode, and as an audio VCO with some very strange FM capabilities. Sounds like something worth $21 to me!
Thanks very much for the explanations Lugia, I thought the same but I wanted to take away my doubts before spending money on something that I wouldn't need.
I tried to sketch a first idea, the Mutant Brain seems good for controlling the modular with the Pyramid. I left the DPO and added the Loquelic Iteras (of this I'm not sure yet but it looks like an interesting and compact VCO) because it seems the VOID Modular ones aren't available in Europe at the moment. As filters I thought of a dual Low-Pass Gate and the Morgasmotron as suggested by @ Ronin1973. The Quadra for ADSR. About the VCAs I think I need more, but I'm not sure what modules to choose. The same goes for the LFOs, I'm pretty undecided about what to choose. Perhaps some multi-function modules could be good for me, given the little space left? For now I have also left out the sequencers.
I would also like to add a sound panning module.
Am I missing something fundamental? What do you think? Thanks again to everyone.
Ha that is a nice suggestion I think the Fold processor is (from now) on my shortlist.
At the moment I mainly use the MB 2S as seperate VCO/LFO couples, direct outing the waves(etc) to my rack.
Sometimes I use the pitch from the buttons, and gate and vca / attenuators also direct.
I did not use the sequencer yet, so I have some learning curve there, and also I need to find out if I can output the voices further in the stream, where the Brute Force is used. For now I can use the direct VCO effect like metalize, but not yet the Brute Force.
But all those options ))
I now really need to think about the VCO part, I really liked the MI Plaits and also the Int. Dixie II +.
(I already had added the dixie II+ to the 3th phase of my rack.)
But Now I have the 110-6 and VOID Gr. as alternatives..
Did not know Modular was so diffucult :)
Dixie has Sub, Void Gr. is really Dual, and Plaits is more chord-ish (with some cloud effects etc).
So I need to finetune some direction for my rack I think.
For now I think TA - Fold Proc. and MI - Kinks are the next 2 purchases, that are the save ones for now.
Maths have to wait for the third row I think (at the moment in fact I only have 2 rows, but I will get another row in June I think).
Ok, Thx, Lugia, (oh hope we did not steal this thread away from Palme).
First thing I have done is to buy a 'power tester' to be sure all earthed sockets in my kitchen are well wired or not.
Then I will try to find out what the possibilities here will be with your example in mind.
The Tiptop Fold is definitely something to consider, but I'd be more inclined to use it on the modules since the MB2 already has its own waveshaping via the "Brute Factor" control. One thing you might seriously think about, though, would be something more potent as a second VCO to tandem with the STO. Not only would this give you the ability to create nice, thick, detuned sounds between the two VCOs, you can use the dual inputs of the Fold as a de facto mixer, bringing them directly into the waveshaper. My suggestion would be to look at the Doepfer A-110-6, as this would also add thru-zero FM possibilities and the modulated timbral capabilities that brings. Or for around the same price, you could even go with the VOID Gravitational Waves, which would put something more West Coast-ish in with a complex VCO to team with the STO.
That's sort of unfortunate, really...even though having balanced power can be a bit of a wiring hassle, balanced power = CLEAN power. I switched from having that same (more typical in N. America) single hot-leg setup to proper balanced 120 V some years ago, and the results were amazing. You could definitely tell that the noise floor in the studio had dropped, and because of the phasing done by the balancing toroids, various clicks and pops and other intrusive powerline garbage were totally eradicated. And all of my gear worked just fine on that balanced arrangement, as well. True, it's definitely a hassle to wire, because mistakes in wiring that sort of thing (floating grounds, especially!) can lead to a lot of problems that you normally don't see in unbalanced power circuits...but, again, the results were worth the trouble.
Thanks @ampism, I had not received the tag notification, obviously I don't mind and I am interested in reading how you will develop your rack.
...made a good deal with @acid303halunque - thanks!
There are 2 points I am thinking about:
I saw Lugia talking about the TipTop Audio - Fold Processor, and because I have no serieus filters at the moment in the rack, maybe this is a good opportunity to shape my first voice from the RackBrute.
The second voice I regelary use to sync the STO.
""Another thing is I am thinking about is to put a 2nd dynamix in the mix and use it to 'shape' the stream to the sync (of the STO) to 2 different syles after each other. But maybe there is another module doing something like that ?""
--Need to rethink this point--
But then still I would like to go further on the melodic part ..
Any suggestions ? Or feedback about my plans , or about my current rack?
Till now, my idea is the following rack, (the second row are the modules I want to buy in addition to the existing first row, Make Noise - Maths / TipTop - Fold processor / Make Noise - Dynamix (a second one) / Mutable Instruments - Kinks ):
https://cdn.modulargrid.net/img/racks/modulargrid_900153.jpg
(I also forgot the Doepfer Sequential Switch wich is in the front row because I also ordered it, so I think I also will look to the switched multiple. but both are not visible, I can not refresh the screenshot.)
and for the longer run the next rack I have in mind :
(3th row are the new modules for this version)
https://cdn.modulargrid.net/img/racks/modulargrid_900194.jpg
I bought a module from @PianoReeves. Great transaction, fast shipping and excellent packaging. Recommended !!
FYI, if you're seeing 110 volts across these devices, then one of your voltage legs has a wiring fault. Power systems in Europe tend to use balanced power, which puts half of the total line voltage on each voltage leg. This sounds very much like one of the legs is going directly to ground, which is a serious -- and potentially dangerous -- problem. Again, I cannot more highly stress the need for ground fault testers to be part of any electronic musician's "must-haves", both for studio use and to check live venue power situations.
-- Lugia
I do not know how it is in other countries, but here in the Netherlands we have 1 Phase : 220/230 Volt and a zero wire to the sockets, and another earth connection for 3 prones plugs.
In the 70-er years it was normal to have 2x 110 (even 127V i think ) phases to the sockets, but that only is normal in older parts of towns, but the modern houses have 0/220 wires..
FYI, if you're seeing 110 volts across these devices, then one of your voltage legs has a wiring fault. Power systems in Europe tend to use balanced power, which puts half of the total line voltage on each voltage leg. This sounds very much like one of the legs is going directly to ground, which is a serious -- and potentially dangerous -- problem. Again, I cannot more highly stress the need for ground fault testers to be part of any electronic musician's "must-haves", both for studio use and to check live venue power situations.
I just got my Arturia RackBrute 6u. And there seems to be some ac leakage which, when go softly touch the front plates of my modules I can feel a buzz. I also suspect that it messes with my modules, my marbles clock input is super sensitive, and randomly fires if I plug a cable into it. And I can hear slight seemingly random pitch variations in my telharmonic, I use an ungrounded plug. Will changing to a grounded plug work? Or what should I do? I have tried with both the supplied ac adapter, and an ac adapter from my make noise skiff (which don’t have this problem)
Thanks
-- Palme
I had the same problem with the Rackbrute, I measured 110V AC (exactly halve the Current in Europe), I have contacted Arturia, and they explained that their gear should used in a grounded socket.
I needed to get my power from the kitchen, but I would not let this get me away from Modular.
For the RackBrute this was a solution but I am not sure this is a total solution, because I ask myself if this is doable in all live situations.
Also I found out that between the earthed RackBrute and the miniBrute is a almost 100 Volt AC difference, I bought another power source with an earthed power plug, but that did not help.
My solution now is to have a constant patch cable between my PNW (a clock port) en the MiniBrute (sequencer clock in).
Same problem was with the keystep, but that I do not use at the moment.
I have also a basic Doepfer case and I noticed that a lot of modules use the rails as ground, but in the doepfer case this is not earthed. So they build up a power difference most add between 10 and 15 volt to the rails, and that also leaks to the front panels.
So with 5 modules I already had around an 50 volts difference with earth, and felt shocks when i touched the panels.
To be honest it shocked me that this problem is not covered right in a lot of cases and modules, but for now I have learned to cope with it, hoping it will not trigger the electrical protection systems in my house.
I have put the PNW in the doepfer case, and have a permanent patch to a MI Links, and from the MI Links the patch goes now to the MiniBrute 2S.
Hey guys!
I am new to modular, and I want to have one to pair with my Ciat-Lonbarde Cocoquantus+Lorre-Mill Double Knot setup that I have via a Low Gain UTL-3. I mainly want to do some noise/ambient music with it.
Tell me what you think and I miss important modules!
https://cdn.modulargrid.net/img/racks/modulargrid_897648.jpg
Hi folks,
This is my current rack:
https://cdn.modulargrid.net/img/racks/modulargrid_899145.jpg
(ALM - Pamela's New workout / Xaoss - Batumi / Noise Engineering - Lapsus Os / Make Noise - Contour / STO / Make Noise - Dynamix / Make Noise - Rosie / Mutable Instruments - Links)
This all combined with a MiniBrute 2S
On my shortlist: Make Noise Maths, Mutable Instruments Kinks
I think modulation motion is covered for now by Contour, Dynamix and a lot of LFO's (Batumi / Pamela's new Workout / MiniBrute 2S / and the expected Maths).
I try to find a new module every month, and my current idea is to increase melodic motion.
Any suggestions ?
I am especially searching for 'golden couples', modules which work very good together with the ones I have (in the middle row).
Hi there.
If you want Moog to finally mass produce the Subharmonicon, or get another manufacturer to clone it (I'll give mine for reference),
please consider signing this online petition.
I've started it yesterday, and already got a big Synth YouTuber to sign and support it.
So please be so kind to consider signing it as well and sharing it with your social network.
https://www.ipetitions.com/petition/getting-the-moog-subharmonicon-in-production
Hi there.
If you want Moog to finally mass produce the Subharmonicon, or get another manufacturer to clone it (I will provide my Subharmonicon for reference), please consider signing this online petition. Within 24 hours I already got one of the big synth YouTubers to sign and support it. Which really helps. But if you want the Subharmonicon, we need more people to sign it!
As a participant of the Moogfest 2018 I was one of the lucky 120 who got their hands on a Subharmonicon. But after reading countless comments online of people hoping this machine going into production, I decided to start this petition.
So please be so kind to consider signing it as well and sharing it within your social network.
https://www.ipetitions.com/petition/getting-the-moog-subharmonicon-in-production
Cheers
Carrot
Robert AA Lowe:
Top row: Kermit, Telharmonic, Twinpeak, FxDf, RxMx, Echophon, SSF DPLR, Erbe-Verb
Second row: Phonogene, Mysteron, ST0, Three Sisters, Just Friends, blank, LXd, Optomix, Tangle Quartet, Bubblesound Mix6, Rosie
Third row: 4ms power, MMG, Function, Rene, Tempi, MN mult, Maths, Wogglebug
https://www.muffwiggler.com/forum/viewtopic.php?t=164786&sid=c36b4e51459f14e932218abea28fac04
Complex VCOs are just as capable of doing ambient music as they are for creating gnarly, raucous racket. The deciding factor is simply how you use it. The nice thing about them, though, is that you can easily whip up complex spectra within one module...which was something of a key thing for the Buchla, which is where the complex oscillator idea comes from. In Buchla's synths, the main working method was to build up complex sounds, then run the results through a low-pass gate, basically a tandemmed LPF and VCO under the same envelope's control.
Anyway, the upshot is that you should be able to use a complex VCO however you see fit. The Buchlas were just as capable at creating delicate, atmospheric sounds as anything else, but the architecture allowed you a little "more" in terms of working with the sounds in real time.
Thanks everyone! Is the void modular oscillator only available in the U.S. at the moment? The doepfer one seems interesting too. So do you think a complex oscillator could be good for ambient stuff? I read somewhere that for example the DPO is a bit rough and aggressive, but I thought with the right effects I could get dreamy sounds from it too. Are there any VCOs that are more indicated than others for ambient/dreamy sounds? I ask because maybe I'm just fascinated by owning a complex one when instead I should focus on something else.
Hhm, seemingly we are coming from different experiences. How many used modules did you buy and how many were broken? I actually bought a new Doepfer module from a well known and respected dealer. A few days after when I unpacked it I found a popped capacitor and burn marks on the PCB. When I returned for a replacement they assumed I had destroyed it myself and denied me compensation. This happened to me 3 month into going modular. This may be a rare case, in my experience as rare as module seller intending to cheat you.
If you are new, apart from a completely dead module, how would you know if a module wasn't working properly? With a new module, you at least have the chance to return and exchange it for a working one (if bought from a dealer). With a used module, if you discover it isn't working right after a week... two weeks... then what?
As I said, most used aren't significantly cheaper than new ones. So my advice for someone who is new to Eurorack is to not buy used modules until you feel comfortable IN Eurorack. I realized you quoted me verbatim. But you have to read it in the context of advice to someone who is NEW to Eurorack.
The Intellijel quad VCA can be used to mix. But then you lose some functionality as a VCA. If you're doing ambient stuff with stereo panning involved, you'll want to run your signals into a dedicated stereo mixer at the end of the signal chain. I'd strongly suggest a stereo mixer with aux sends. You can get away with mixing your signals in an external mixer, but then you have to contend with eurorack synth level signals going into a line level mixer. Depending on the external mixer this may or may not work out well.
In Eurorack, you'll mix your final output as described above. But you'll probably also use other modules to mix/attenuate CV, sub-mix audio like your percussion or a combination of oscillators as a complex waveform to go into one filter, etc.
I'm using the Blue Lantern Stereo Sir Mix A Lot because it's inexpensive and has a decent amount of features. You'll find other modules like the Roland 531 that include headphone outputs as well as a stereo line level output... but no aux sends. Happy Nerding also makes stereo mixing modules as well.
I don't have the Zadar. It's a quad envelope generator. But I don't know if you can get traditional envelopes out of it controlling A,D, R times and the sustain level independently. The Maths can function as a dual attack, decay envelope if you trigger it. Or can provide attack, sustain, release envelopes if you run a gate into the non-trigger inputs on channels 1 and 4. An alternative to the Maths is the Befaco Rampage. There's a lot of overlap between the two but some nice subtle differences.
The style you cited as an example is heavily dependent on reverbs, delays, and other effects. A big part of the sound is the effects. the Disting has reverb, delay, etc. But it's a jack-of-all-trades and a master-of-none. So you may want to look at modules like the Z-DSP or 1010 Music's Series 1 module which gives you access to the Bitbox, SynthBox, and FXBox firmware.
I don't think you'll be able to generate the rich palette of your examples on your beginning set-up. I would go with what you have and see how far you can get with it, learn a bit more about your gear and your tastes and expand slowly.
@NicoKeet tagging you here because it looks like we're in a similar position - i.e starting from 0-coast and slowly adding bits... Hope you don't mind :)
Cool, thanks again @Ronin1973
Just to clarify, in answer to my question regarding an output module; were you indirectly answering that when you mentioned having a mixer? Would the Intellijel Quad VCA serve as a mixer?
I forgot to mention that as well as the 0-coast and Keystep, I have the Morphagene already. So I have a Happy Ending rack (84HP), and my plan now is to get another 2 to 4 modules that I can fully dive into, and will enhance the 0-coast possibilities.
So, in your opinion, if I were to get the Zadar, a Maths and the Disting Mk4, would this be a workable, basic set-up? Or would I need a mixer and/or output module? And I might also get a micro Plaits to add another voice too.
Also, regarding headphones, yes I will be very cautious - I'm currently coming out of 0-coast, into pedals, out of pedals into an Alesis mixer, out of mixer into studio monitors....no headphones involved. was just thinking about the Rosie for live performance in the future.
To give an idea of what I want to create, I'm really into cosmic collage, stuff like Cool Maritime, Koen Holtkamp, Kaitlyn Aurelia Smith (not the stuff with voice particularly, but her collab with Suzanne Ciani blows my mind), ...also stuff like DSR Lines, Matthewdavid's Mindflight, Kosmische shit...Klaus Schulze, Didier Bocquet, Laurie Spiegel, etc etc
Check the track called "Forest Bathing" here to get a good idea of what I want to do:
https://coolmaritime.bandcamp.com/album/sharing-waves
Thanks again!
Your best friend is Youtube.
-- Ronin1973
I second.
Do not buy anything used from individuals.
-- Ronin1973
In most cases a broken module wasn't the problem, my limited understanding was.
My first two rows of 84hp were all second hand and they were perfect to start out with. Stll use most of them.
Can we get a rack planner for 4ms pods? If not I’ll use the shelf